Underwriting & Risk

Dhoom Organics Fire: Why a 'Red-Category' Hazardous Chemical Godown Needs a Different Fire Policy Than a Paint Plant

A night fire at Dhoom Organics in Greater Noida, listed in pollution-control records as a 'red' category hazardous chemical storage facility, is a reminder that storage-only chemical sites need their own occupancy, goods category and stock basis on the fire policy. Here is why those details decide whether a claim survives.

Tarun Kumar Singh
Tarun Kumar SinghStrategic Risk & Compliance SpecialistAIII · CRICP · CIAFP
9 min read

Listen to this article

Audio version • 9 min read

chemical storageoccupancy classificationfire insurance underwritinghazardous goodspublic liability act

Last reviewed: October 2026

What Happened at Dhoom Organics, and What Is Still Unknown

At around 2 am on Friday, 25 September 2026, a fire broke out at Dhoom Organics in Dhoom Manikpur, Greater Noida, in the Badalpur police station area. Fire brigade teams, Badalpur Police and the 47th Battalion of the SDRF from Ghaziabad responded. Media reports put the number of fire vehicles at 21, with an early report citing more than 24. Neither figure has been confirmed as a final count (The Logical Indian, 25 September 2026).

The fire damaged parts of the premises and several vehicles parked there. No casualties were reported. There was no official loss estimate, and the cause was not confirmed: a short circuit was mentioned only as a possibility.

Two descriptions of the business sit side by side in the public record. Media coverage described the unit as involved in paint manufacturing. Pollution-control records list it at Khasra No. 914 and classify it as an isolated storage facility for hazardous chemicals in the 'red' category.

This post does not suggest the unit's insurance, if any, was misdescribed or that any claim is in doubt. Nothing about its cover is public. The case is used only because the gap between "paint manufacturing" and "isolated storage of hazardous chemicals" is exactly the gap that causes trouble on fire proposals across India.

For underwriters, brokers and risk managers, the useful question is general: when a site stores hazardous chemicals for a paint or coatings business rather than making paint itself, how should it be described on a fire or industrial all risks proposal, and what happens at claim time if it is described wrongly?

'Red Category' Is a Pollution Label, Not a Fire Rating

The 'red' tag in the pollution-control record comes from the categorisation of industries by environmental pollution potential used by the Central and State Pollution Control Boards, which sorts activities into red, orange, green and white. Red marks the highest pollution potential. It governs consent to establish and operate, inspection frequency and siting restrictions.

It does not tell an underwriter how a fire will behave, and it is not a term any Indian fire policy uses. Two practical consequences follow:

  • A red-category consent is strong evidence that the site handles materials the fire market also treats as hazardous. A proposal that lists the same site as a low-hazard occupancy should prompt questions.
  • The consent order itself is a useful underwriting document. It usually names the activity (storage, formulation, manufacturing), the materials and sometimes the permitted quantities. If the consent says "storage" and the proposal says "manufacturing", or the reverse, someone has to reconcile them before inception, not after a loss.

Brokers placing chemical risks should ask for the current consent to operate along with the proposal and check that the activity described matches. The same check applies to licences under the Petroleum Rules or the Manufacture, Storage and Import of Hazardous Chemical Rules, 1989, where they apply, because each regulator's description of the site is a record the insurer can later compare against the proposal.

How Storage-Only Chemical Sites Get Misdescribed

Fire underwriting in India still runs on occupancy. Even after de-tariffing, insurers' rating guides separate manufacturing occupancies from storage risks, and within storage they separate non-hazardous goods from hazardous goods, often grouping hazardous goods into categories by flammability and fire load. The tariff legacy is visible in almost every insurer's rate guide. Our piece on occupancy and protection grading explains how that grading turns into rate and terms.

Storage-only chemical sites tend to be misdescribed in two recurring ways.

Rated as the parent's manufacturing occupancy

A paint company with a plant and a separate chemical godown often places both on one policy under the plant's occupancy, for example "paint and varnish manufacturing". That looks conservative, since manufacturing usually rates higher, but it describes the wrong risk. A detached godown full of solvents, resins and pigments has a different fire load, a different spread pattern and different protection needs from a process floor. The insurer has not underwritten what is actually there.

Goods categories left blank or generic

Proposals for warehouses and godowns frequently say "stock of chemicals" or "raw materials" without naming the materials or their hazard category. Where the insurer's rating distinguishes hazardous from non-hazardous goods, and flammable liquids from inert solids, a blank or generic description leaves the most important rating input undeclared.

The common thread is simple. The description on the policy schedule is a promise about what the insured property is. If the site turns out to be something else, the policy may not respond as the insured expects.

Why the Occupancy Description Decides Whether a Claim Survives

After a large fire, the surveyor reconstructs what was on the premises, how it was stored and what it was doing there. That reconstruction is compared with the proposal and the schedule. A mismatch can affect the claim in three ways.

  1. Non-disclosure or misrepresentation. Fire insurance is a contract of utmost good faith. If a material fact such as the true occupancy or the presence of hazardous goods was not disclosed, the insurer may seek to avoid the policy. Indian courts generally put the burden on the insurer to show that the fact was material and was not disclosed, which we cover in detail in our piece on non-disclosure and claim repudiation. Insurers do win these cases when the occupancy gap is large and documented.
  2. Breach of a description or warranty. Many schedules describe the risk location and occupancy as a condition of cover, and some carry warranties on storage limits or segregation. A breach of warranty can defeat a claim even where the insured acted in good faith.
  3. Premium adjustment and settlement on a proportionate basis. Where the insurer accepts the claim but finds the risk was rated at a lower occupancy than it should have been, it may seek to settle in the proportion the premium paid bears to the premium that should have been charged. This is a negotiated outcome, not a guaranteed one, but it can cut a large claim sharply.

For a red-category chemical store, the burden is on the insured and broker to make the proposal match the consent order, the licences and the site.

Stock Declaration Basis and Underinsurance on Chemical Inventory

Chemical stocks at a paint-linked godown move quickly. Solvent and resin volumes can swing with production runs, seasonal demand and supplier pricing, so the value at risk on any given night may be far from the sum insured set at inception.

Two bases are common for fluctuating stock:

  • Fixed sum insured on stock, set at the expected peak. Simple, but if the actual stock at the time of loss exceeds the sum insured, the average clause reduces the claim in proportion to the underinsurance.
  • Declaration or floater policy, where the insured declares stock values periodically (usually monthly) against a maximum sum insured, and premium is adjusted on the average declared value. This tracks real values better, but only if declarations are made on time and honestly. A missed or understated declaration can cap or proportionately reduce the claim.

For a hazardous-goods store, the stock declaration needs two layers of detail: value and hazard. A declaration that reports value correctly but folds flammable liquids into a general "chemicals" line does not tell the insurer what it is carrying. Where segregated storage limits or quantity warranties apply, the declaration is also the record that shows whether they were respected.

Stock belonging to others (a principal's materials held on job-work, for example) also needs to be declared as held in trust, or it may fall outside cover.

Side Exposures: Parked Vehicles and Statutory Public Liability

The Dhoom Organics fire also damaged several vehicles parked on the premises. That detail points to two exposures that sit outside a standard fire or IAR policy and are easy to miss on a chemical site.

Vehicles on the premises

A fire policy covers the property described in its schedule. Motor vehicles are usually not described there and are commonly excluded. Fire damage to a company-owned vehicle normally falls under the own-damage section of its motor policy, which covers fire as a named peril, so it matters whether each vehicle has own-damage cover or only third-party cover. Vehicles belonging to transporters, contractors or employees are the owner's to insure, but the site operator may face a liability claim if the owner alleges the fire started through the operator's negligence. That is a general public liability question, not a fire policy one.

Sites where tankers and trucks wait overnight to load or unload should set out parking rules (distance from storage, no parking against the godown wall) and check whether their liability cover extends to third-party vehicles in their care.

Statutory cover under the Public Liability Insurance Act, 1991

An owner who handles a hazardous substance above the notified quantities must carry insurance under the Public Liability Insurance Act, 1991, which imposes no-fault liability to pay fixed relief for death, injury and property damage to third parties from an accident involving that substance. The insured also contributes to the Environment Relief Fund. A red-category chemical store is a likely candidate for this requirement, and the Act policy is separate from the fire policy and from any voluntary public liability cover. Our post on no-fault claims under the PLI Act explains how the cover works and what it actually pays.

The Act's relief amounts are modest, so a site near homes, roads or other factories should treat the statutory policy as a floor and buy voluntary liability insurance for fault-based claims above it.

A Placement Checklist for Chemical Godowns Serving a Paint or Coatings Business

For a broker or risk manager placing fire insurance for a storage-only chemical site, the following steps close most of the gaps described above.

  1. Describe the site as storage, not as the parent's process. Use the storage occupancy for the godown, even if it sits on the same policy as the plant, and list it as a separate location with its own sum insured.
  2. Name the goods and their hazard category. List the main materials (solvents, resins, thinners, pigments, additives) and map them to the insurer's hazardous-goods categories. Attach a material list with flash points where available.
  3. Reconcile with regulatory records. Check that the occupancy matches the pollution-control consent, the fire NOC and any hazardous-chemical or petroleum licence. Resolve differences before inception.
  4. Choose the stock basis deliberately. Use a declaration or floater basis if values swing, and set a calendar for declarations with a named owner.
  5. Disclose protection honestly. State what detection, suppression, hydrant and water supply exist at the godown itself, not at the main plant. If the godown has none, say so and price the terms accordingly.
  6. Confirm the side covers. Check PLI Act compliance, voluntary public liability limits, motor own-damage cover for site vehicles, and whether stock held in trust is declared.
  7. Record every change mid-term. A new product line, a bigger tank farm or a switch from storage to blending changes the occupancy. Notify the insurer by endorsement rather than waiting for renewal.

None of this is unusual, and none of it costs much at placement. The cost of skipping it shows up only after a fire, when the surveyor's description of the site and the policy's description of the site are read side by side.

About the Author

Tarun Kumar Singh

Tarun Kumar Singh

Strategic Risk & Compliance Specialist

  • AIII
  • CRICP
  • CIAFP
  • Board Advisor, Finexure Consulting
  • Developer of the Behavioural Underinsurance Risk Index (BURI)

Tarun Kumar Singh is a seasoned risk management and insurance professional based in Bengaluru. He serves as Board Advisor at Finexure Consulting, where he advises insurance, fintech, and regulated firms on governance, growth, and trust. His work spans insurance broker regulatory frameworks across India, UAE, and ASEAN, IRDAI compliance and Corporate Agency model reform, VC governance in insurtech, and MSME insurance gap analysis. He is the developer of the Behavioural Underinsurance Risk Index (BURI), a framework applying behavioural economics to underinsurance and insurance fraud risk.

Frequently Asked Questions

Does a 'red category' pollution classification change my fire insurance premium?
Not directly. Red, orange, green and white are pollution-control categories and no Indian fire policy rates on them. Insurers rate on occupancy, the hazard category of goods stored, construction and protection. The red tag is still relevant because it signals hazardous materials, and an underwriter who sees a red-category consent alongside a low-hazard occupancy on the proposal will ask questions.
Our chemical godown is on the same policy as our paint plant under the manufacturing occupancy. Is that a problem?
It can be. A storage site should be described as storage with the goods and their hazard category named, even if it sits on the same policy as the plant. Rating it under the plant's manufacturing occupancy describes a different risk from the one the insurer is covering, and at claim time the question is whether the description was accurate, not whether it carried a higher rate. List the godown as a separate location with its own sum insured and occupancy.
How should we insure chemical stock whose value changes every month?
A declaration or floater policy usually fits better than a fixed sum insured. You set a maximum sum insured, declare actual stock values periodically, and premium is adjusted on the average declared value. Declarations must be on time and accurate, and for hazardous goods they should identify the type of material as well as its value. With a fixed sum insured, stock above the insured value at the time of loss triggers the average clause.
Are vehicles parked at our site covered by the fire policy if they burn?
Usually not. Fire policies cover the property described in the schedule, and motor vehicles are commonly excluded. Fire damage to your own vehicles is normally a claim under the own-damage section of their motor policies. Vehicles owned by transporters or employees are insured by their owners, who may claim against you if they allege your negligence caused the fire, which is a liability question.
Do we need a Public Liability Insurance Act policy if we already have public liability cover?
If you handle a hazardous substance above the notified quantities, yes. The Public Liability Insurance Act, 1991 policy is a statutory requirement that pays fixed no-fault relief to third parties and carries an Environment Relief Fund contribution. Voluntary public liability cover is separate and responds to fault-based claims above the statutory amounts. Most chemical sites near populated areas need both.

Related Glossary Terms

Related Insurance Types

Related Industries

Related Articles

Sarvada Intelligence

Ready to see Sarvada in action?

Explore the platform workflow or start a product conversation with our underwriting automation team.

Explore the platform